Portrait Artist Forum    

Go Back   Portrait Artist Forum > Studio & Equipment


Reply
 
Topic Tools Search this Topic Display Modes
Old 01-09-2010, 09:01 AM   #1
Allan Rahbek Allan Rahbek is offline
Juried Member
 
Allan Rahbek's Avatar
 
Joined: Mar 2004
Location: 8543-dk Hornslet, Denmark
Posts: 1,642



Hi Monique,
I have some ideas to share, if only you could make a small plan sketch of the room and the approximately placement and size of the windows.

Good even light on the canvas and palette is first priority, no reflected light from the back of you is part of it.

Supplementing light placement, is the ceiling high enough to make the distance to the easel?

Storing place? And so on.

Are you left or right handed?
__________________
Allan Rahbek
http://www.allanrahbek.dk
  Reply With Quote
Old 01-09-2010, 11:03 AM   #2
Monique McFarland Monique McFarland is offline
Juried Member
 
Monique McFarland's Avatar
 
Joined: Oct 2005
Location: Mobile AL
Posts: 100
Send a message via AIM to Monique McFarland
thanks!!!

Quote:
Originally Posted by Allan Rahbek
Hi Monique,
I have some ideas to share, if only you could make a small plan sketch of the room and the approximately placement and size of the windows.

Good even light on the canvas and palette is first priority, no reflected light from the back of you is part of it.

Supplementing light placement, is the ceiling high enough to make the distance to the easel?

Storing place? And so on.

Are you left or right handed?
First of all, I'm going to warn you, I am NOT and never could be a digital artist, heck, I can't even label a picture with this darn mouse! embarassing!

Knowing that, please excuse my very crude labeled prelimary sketch of my studio. My husband just left to meet the contractor with the correctly scaled drawings the architect gave us yesterday. All I have is the first sketch which has changed slightly..I added a wall on the west side of the room which makes the sink now appear recessed in the wall. the ceiling is hipped with the lowest point being 9 ft and I think he said its a 45 degree hip?? as soon as I find out correct information, if it is different from what Im saying now, I'll post it. Initially, the room was 21 x 15 but I think it is a little longer now. the ceiling I want to mimic my new den ceiling which is vaulted with beams and will be in natural pine, I think. a lighter wood just sealed, not stained. So, going into this design, the given's are....natural color wood hipped ceiling, one full exposed brick wall (lighter in value, but variations of color), three sheetrocked walls and two walls have windows...south side is a large 4 or 5 foot solid sheet glass square window and the east side is one 3x5' standard window to the left of a 4' double glass door that has the little square panel windows? tresses?

ok, hope this helps..and Its been a while since i've posted here so I'm going to attempt to upload the picture...hope I get this right!

Thanks in advance for your help! I have one shot to make this great and I want to make sure I don't mess it up!
Attached Images
 
__________________
Monique
  Reply With Quote
Old 01-09-2010, 11:10 AM   #3
Monique McFarland Monique McFarland is offline
Juried Member
 
Monique McFarland's Avatar
 
Joined: Oct 2005
Location: Mobile AL
Posts: 100
Send a message via AIM to Monique McFarland
P.s.

Quote:
Originally Posted by Allan Rahbek
Hi Monique,
I have some ideas to share, if only you could make a small plan sketch of the room and the approximately placement and size of the windows.

Good even light on the canvas and palette is first priority, no reflected light from the back of you is part of it.

Supplementing light placement, is the ceiling high enough to make the distance to the easel?

Storing place? And so on.

Are you left or right handed?
as far as lighting from the ceiling, I can do whatever I want...I was asked about drop lighting to be able to light evenly from any angle of ceiling...I found these round drop lights, full spectrum, that are used in situations like gyms, factories or warehouses...you know just hang down from a foot or ten feet...it would look cool, I think with that sort of look with the wood ceiling being hipped and the brick wall...sort of warehouse loft sort of look... cool to me, I think, unless it is overkill, or doesn't fit the lighting needs I have. I have the freedom to do whatever, though, thats the beauty. I tell them what I want or need and they are going to make it happen (within reason :0) )

storage at this point is only under the sink...may have bookshelves or other shelving, not built in..don't know yet..

and I'm right handed
__________________
Monique

Last edited by Monique McFarland; 01-09-2010 at 11:14 AM.
  Reply With Quote
Old 01-09-2010, 12:17 PM   #4
Allan Rahbek Allan Rahbek is offline
Juried Member
 
Allan Rahbek's Avatar
 
Joined: Mar 2004
Location: 8543-dk Hornslet, Denmark
Posts: 1,642
Monique,
the room looks ideel. I would go for the east facing window for primary light. And a light box, with several "daylight" tubes, under the seiling, for night/suppliment light. Maybe hanging in a railing system so that you can chance the placement if needed.

I would place the depot room behind a curtain of some kind, or doors, on the northern wall. The curtain should me a darker, neutral color to avoid light reflections onto the wet paint. The depot should contain ALL objects that you don't need at hand right now. No shelf with paint tubes or decorations, if you get me? It adds up!!!!

You could have a working table on wheels to move around with the easel, containing palette and so on.

I imagine that you stand in the middle of the room, facing towards the south window, and having the working light inn from the east wall window. The south window could have inside shutters to blind out the light if needed.

The floor could be wood and you could have a
__________________
Allan Rahbek
http://www.allanrahbek.dk
  Reply With Quote
Old 01-09-2010, 12:28 PM   #5
Monique McFarland Monique McFarland is offline
Juried Member
 
Monique McFarland's Avatar
 
Joined: Oct 2005
Location: Mobile AL
Posts: 100
Send a message via AIM to Monique McFarland
[QUOTE=Allan Rahbek]Monique,
the room looks ideel. I would go for the east facing window for primary light. And a light box, with several "daylight" tubes, under the seiling, for night/suppliment light. Maybe hanging in a railing system so that you can chance the placement if needed.

I would place the depot room behind a curtain of some kind, or doors, on the northern wall. The curtain should me a darker, neutral color to avoid light reflections onto the wet paint. The depot should contain ALL objects that you don't need at hand right now. No shelf with paint tubes or decorations, if you get me? It adds up!!!!

You could have a working table on wheels to move around with the easel, containing palette and so on.

I imagine that you stand in the middle of the room, facing towards the south window, and having the working light inn from the east wall window. The south window could have inside shutters to blind out the light if needed.

The floor could be wood and you could have a
__________________
Monique
  Reply With Quote
Old 01-09-2010, 12:51 PM   #6
Allan Rahbek Allan Rahbek is offline
Juried Member
 
Allan Rahbek's Avatar
 
Joined: Mar 2004
Location: 8543-dk Hornslet, Denmark
Posts: 1,642
You should get the working light from one source only, being it from a window or a group of daylight tubes.

The wooden floor could be covered totally with vinyl, wich can be removed later, or it could be lacquered heavily, for protection, and later sanded to remove paintdrops.

The brick wall.... is it only the dark section that is raw bricks? If so you could place the depot on the eastern wall.

Wall color is not a big issue, light, rather neutral, is what I believe in.

'll be back later.
__________________
Allan Rahbek
http://www.allanrahbek.dk
  Reply With Quote
Old 01-09-2010, 07:05 PM   #7
Allan Rahbek Allan Rahbek is offline
Juried Member
 
Allan Rahbek's Avatar
 
Joined: Mar 2004
Location: 8543-dk Hornslet, Denmark
Posts: 1,642
I recently moved into a new room.
I made a light box with 4 "daylight" tubes and hung it in a rail so that I can move it a bit to the side if I want to shift the light direction. The light is situated ca. 3.5 m ( 12') above the floor The light is much more even than in my old studio where the distance was about the half.

I want to be able to change the setup easily, to paint model, still life etc.
Attached Images
 
__________________
Allan Rahbek
http://www.allanrahbek.dk
  Reply With Quote
Old 01-09-2010, 08:19 PM   #8
Allan Rahbek Allan Rahbek is offline
Juried Member
 
Allan Rahbek's Avatar
 
Joined: Mar 2004
Location: 8543-dk Hornslet, Denmark
Posts: 1,642
Is it possible to make the depot behind the new western wall?
The light can slide on a long rail.
Attached Images
 
__________________
Allan Rahbek
http://www.allanrahbek.dk
  Reply With Quote
Reply


Currently Active Users Viewing this Topic: 1 (0 members and 1 guests)
 
Topic Tools Search this Topic
Search this Topic:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump

Similar Topics
Thread Topic Starter Forum Replies Last Post
Schooling the Artists SB Wang School, Atelier and Workshop Discussion 0 05-18-2008 06:52 PM
Pricing your art Richard Monro Business, Marketing & PR 61 07-02-2006 08:05 PM
Dutch Discover Vermeer Studio in Delft Garden Karin Wells Cafe Guerbois Discussions - Moderator: Michele Rushworth 3 02-25-2005 08:58 PM
Guest Newsletter from Robert Maniscalco Chris Saper Cafe Guerbois Discussions - Moderator: Michele Rushworth 7 01-08-2003 03:11 PM
Dave Barry: Modern Art Stinks Marvin Mattelson Cafe Guerbois Discussions - Moderator: Michele Rushworth 7 10-11-2002 04:49 AM

 

Make a Donation



Support the Forum by making a donation or ordering on Amazon through our search or book links..







All times are GMT -4. The time now is 02:10 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.